SLM 3
1 Temperature (Seven Segments) 7 Temperature Setting
• To indicate the ambient temperature set by the
user.
• Set the desired temperature.
• Press ▲ or ▼ button to increase or decrease
the set temperature. The setting range is between
16°C to 30°C (60°F to 80°F).
2 Mode
• To indicate the selected operating mode: HEAT &
DRY / COOL / FAN (LED green / yellow / red).
8
Timer Switch Setting
• Press the set butt
on to activate the switch timer
of the air conditioner unit (the setting range is
between 1 to 10 hours). The unit will be at ON or
OFF state in function of operating mode.
3 Ventilation Speed
• To indicate the selected ventilation speed: LOW /
MED / HIGH
• For U1-SB125 only have single speed: HIGH.
9
“Sleep” Function
4 Auto Selection
• Press the sleep button to select the sleep
function. This function cann
ot be selected if the air
conditioner unit is operating under FAN mode only
or dry mode. For SLEEP function operating under
COOL mode, the setting temperature increases to
0.5°C after 30 minutes, 1°C after 1 hour and 2°C
after 2 hours.
• Automatic selection for speed, whereby the speed
is automatically adjusted according to the room
temperature.
5 Fan and Ventilation Mode
• Press the fan button to set th
e desired selection.
10
“ON/OFF” Switch
6 Operation Selection Mode
• Press once, the air conditioner unit starts.
• Press the mode button to select the type of
operation mode.
• Press again, the air conditioner unit stops.
11 IR Receiver
• Cooling unit: COOL, DRY, FAN.
12
Automatic Air Swing (Optional)
• Heat pump unit: AUTO, COOL, DRY, FAN, HEAT.
• Press the SWING button to activate the
automatic air swing
function.
• To distribute the air to a specific direction, press
the button and wait until the louver move to the
desired direction and press the SWING button
once again.
Kommentare zu diesen Handbüchern