Components Maintenance Procedure Recommended Schedule
Indoor Air Filter
Indoor Unit
Condensate Drain
Pan and Pipe
1. Check and clean. Every 3 months.
Indoor Fan 1. Check for unusual noise. As necessary.
Indoor/Outdoor
Coil
Every month.
Every month.
Electrical
Every 2 months.
Every 2 months.
Compressor
Every 6 months.
Compressor
Lubrication
No maintenance required.
Fan Motors
Lubrication
1. All motors pre-lubricated and sealed at factory. No maintenance required.
The unit is designed to give a long life operation with minimum maintenance required.
However, it should be regularly checked and the following items should be given due
attention.
1. Remove any dust adhering on the filter by using
avacuum cleaner or wash in lukewarm water (below
40°C/104°F) with a neutral cleaning detergent.
2. Rinse the filter well and dry before placing it back on to
the unit.
3. Do not use gasoline, volatile substances or chemicals
to clean the filter.
1. Clean any dirt or dust on the grille or panel by wiping it
with a soft cloth soaked in lukewarm water (below
40°C/104°F) and a neutral detergent solution.
2. Do not use gasoline, volatile substances or chemicals
to clean the indoor unit.
1. Check and remove dirt which are clogged between
fins.
2. Check and remove obstacles which hinder air flow
in and out of indoor/outdoor unit.
1. Check voltage, current and wiring.
2. Check faulty contacts caused by loose connections,
foreign matters, etc.
1. No maintenance needed if refrigerant circuit remains
sealed. However, check for refrigerant leak at joints
and fittings.
1. Oil is factory charged. Not necessary to add oil if
circuit remains sealed.
At least once every 2 weeks.
More frequently if necessary
At least once every 2 weeks.
More frequently if necessary
Kommentare zu diesen Handbüchern