McQuay M5MSX Spezifikationen PDF herunterladen (Seite 16)

M5MSX-2009

Mounting Installation Plate

Ensure that the wall is strong enough to withstand the weight of the unit. Otherwise, it is necessary to reinforce

the wall with plates, beams or pillars.

Use the level gauge for horizontal mounting, and x it with 4 suitable screws.

In case the rear piping draws out, drill a hole 65mm in diameter with a cone drill, slightly lower on the outside

wall (see gure)

Hole With Cone Drill

Mount The Unit Onto The Installation Plate

Hook the indoor onto the upper portion of the installation plate (Engage the two hooks at the rear top of the

indoor unit with the upper edge of the installation plate). Ensure that the hook are properly seated on the

installation plate by moving it to the left and right.

Water Drainage Piping

The indoor pipe must be in a downward gradient for smooth drainage. Avoid situations that are likely to cause

water leak.

72.0

'A'

Screw position in the wall

ø 65.0mm Hole in the wall

Screw position in the wall

Ø 65.0 mm Hole in the wall

CENTER LINE

Indoor Side

Outdoor Side

Correct

End

Dipped

Into

Water

Leaking

Water

Leaking

Water

Leaking

Wrong

Drain

1. Hook the unit onto the installation plate

Application Information

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 67 68

Keine Kommentare

McQuay M5MSX Spezifikationen Seite 16